 Last additions - Bean's Gallery |
166 viewsOct 28, 2020
|
|
157 viewsOct 28, 2020
|
|
156 viewsOct 28, 2020
|
|
164 viewsOct 28, 2020
|
|
576 viewsApr 13, 2017
|
|
492 viewsNov 21, 2016
|
|
562 viewsJul 28, 2016
|
|
543 viewsJul 11, 2016
|
|
508 viewsJul 11, 2016
|
|
Step 09: tacho circuit and motor unit495 viewsonce you removed the five screws you can remove the unit for the conversionJun 22, 2016
|
|
Step 12: resistor R2 (15k Ohm) partialy desoldered482 viewsresistor R2 (15k Ohm) partialy desolderedJun 22, 2016
|
|
Step 11: solder points of resistor R2 (15k Ohm)497 viewsdesolder resistor R2, locking pliers are one way to pull the resistor leg loose once the solder point is softenedJun 22, 2016
|
|
Step 08: screws (5) holding the circuit and motor in place478 viewsunscrew these 5 screws to remove the circuit and motor (the two items are fixed together and come off as one)Jun 22, 2016
|
|
Step 10: resistor R2 (15k Ohm)480 viewsthis is the resistor R2 (15k Ohm) that needs to be replaced with a 10.2k Ohm unitJun 22, 2016
|
|
Step 07: circuit and motor revealed463 viewsonce you removed the two fascia panels and light distribution thinggies, the circuit board and motor are revealed - this is what we have to remove in the next step.Jun 22, 2016
|
|
|
|
